block assemmbled magnetic core for high current application
1.Block magnetic ocres for high current application
2. meterials: FeSi
3.Perm: 40
4.AL(nH/N2):315
5.Core Loss: Medium
block assemmbled magnetic core for high current application
PHD magnetic powder core is made by special FeSi powder. It doesn’t include any adhesive, no aging. So alloy has a higher continuous operating temperature (155°C).
PHD-60 Can be used in high frequency (<50KHZ) and medium power (50KW-100KW).
Properties
1.Saturation magnetic flux density: 1.5T
2.Density (g/cm3): 6.5
3.Curies Temperature: 500°C
4.Continuous opening temperature:(200°C)
Applications
1.UPS Harmonic Filter Inductors
2.Inverters for Solar, Wind powder
3.High-speed Rail powder systems
4.Welding power suppliers
5.High-power Industrials
Benefits
PHD-60 VS Amorphous laminations with gaps(1MM<Gaps size<4mm)
0.1mm ordinary FeSi alloy laminations gaps (>4mm)
Big size powder core OD>4 inch FeSi6.5% / HIGH FLUX 60μ powder core
1. Lower cost
2. Lower loss (Nearly zero gaps with reduction in fringe flux and core loss).
3. No noise
4. No aging .
5.Better temperature stability
6. Lower 30% weight and volume and easier to wind technical than big size powder core.
Part name constructed is showed as below
Thank you for spending time learning about our product. For more information, please contact us for sample for testing , or go to our website.